Recommendation For Fitting Easycarpeter Carpet Tiles

Carpet tiles do not require the use of a permanent bond adhesive, gripper or underlay. We recommend the use of an approved tackifier system or anti-slip (which is applied to the whole of the surface area, especially underneath all seams; see the illustration.) Once the tackifier has been allowed to dry the carpet tiles can be placed in position with a hand or knee stretcher. Small areas and individual offices less than 20 m2 can be laid with the use of double sided tape underneath all the seams. Consult Easycarpeter Technical Services about this. Particular attention should be paid to cut tiles forming the perimeter of the area and also to doorwayswhere partial tiles may also feature. 

Note: All cut and end tiles should be laid tightly fitting cq fitting to the wall.