Daily Maintenance Of Carpet Tile

1. Vacuum

Vacuuming is the basic work of carpet maintenance. When vacuuming, it is best to vacuum each part twice. The first time is to suck against the pile of the carpet. Although it is hard, it can be vacuumed thoroughly. The second time is to suck along the pile of the carpet. It can restore the original pile guide of the carpet, avoid pile disorder and cause carpet color difference. It should be emphasized that no matter how many times the carpet is vacuumed, the last pass must be sucked down the pile.

Common area carpet vacuuming should use a vacuuming device with a rotary pile vibrator for daily vacuum cleaning. This vibrator usually includes one or more brush bars that are more effective at removing dust from surfaces or deep within carpets .

2. Carpet cleaning

Regularly washing the carpet in different areas can restore the carpet to its original appearance and prolong its life. There are two basic methods of carpet cleaning, one is dry cleaning and the other is wet cleaning. Whichever method you choose to wash your carpets, it's best to hire a professional with good job training to do the job (most cleaning companies offer this service).

(1) Dry cleaning

There are two ways to dry-clean carpets:

foam dry cleaning

It is one of the most common carpet surface foam cleaning. The foam dry cleaning machine uses a rotating brush and an implanted wet vacuum suction head to spray a large amount of detergent on the carpet pile. Under the action of the rolling brush, the detergent is removed. After cleaning the fluff, use a vacuum cleaner to absorb the washing foam and suspended dust.

dry extraction

The method is that the mixture of solvent, emulsifier, water and detergent is sprayed on the carpet surface manually or through a dispensing container, brushed into the carpet pile by washing equipment, and rotated and washed for 30 minutes, and then the detergent and dust are absorbed.

Dry cleaning is surface cleaning, which can effectively restore the surface of the carpet to clean, but it does not remove the dirt that is deeply hidden in the carpet. It must be cleaned thoroughly.

(2) Wet cleaning

When the oil stains and other sticky substances of the carpet have obviously accumulated, the accumulation of dust and dirt has affected the color of the carpet and the resilience of the carpet pile, and the dry cleaning method cannot be eradicated, the carpet should be wet cleaned, that is, thoroughly cleaned.

There are two ways to wet-clean carpets:

Spray Cleaning

The method is to spray hot water and detergent onto the carpet under pressure. Under the action of the water and detergent, use a carpet washing device equipped with a rotating or oscillating brush to separate the dirt from the fibers and suck it away.

Steam Cleaning

This is a very effective and most thorough carpet washing method to remove the dirt embedded in the tuft of the carpet and the dirt on the surface of the carpet. Also known as extraction cleaning. A steam solvent composed of a mixture of water and cleaning liquid released by a special steam dry-cleaning machine is used to spray on the carpet, and then stirred by a mechanical oscillating brush to remove the dirt from the carpet fibers and suspend in the solvent, and then pass the implanted vacuum suction. Head clear.